I’ll admit to not having achieved a radical verification. Nevertheless, I’d nonetheless guess cash that AAA/RBAC providers are extra often talked about on Cisco certification blueprints than some other networking matter. From the CCNA to the Skilled stage, you’ll discover AAA, TACACS+, RADIUS, and RBAC listed on the examination matters.
Here’s a handful of examples should you’d prefer to test it out your self:
- 200-301 CCNA
- 2.8 Describe AP and WLC administration entry connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)
- 5.8 Differentiate authentication, authorization, and accounting ideas
- 350-401 ENCOR
- 5.1 Configure and confirm system entry management
- 300-410 ENARSI
- 3.1 Troubleshoot system safety utilizing IOS AAA (TACACS+, RADIUS, native database)
- 300-430 ENWLSI
- 8.1 Implement system entry controls (together with RADIUS and TACACS+)
- 350-701 SCOR
- 2.7 Configure AAA for system and community entry similar to TACACS+ and RADIUS
- 300-715 SISE
- 7.0 Community Entry System Administration
- 350-601 DCCOR
- 5.xa Apply community|compute|storage safety – AAA and RBAC
- 300-615 DCIT
- 5.xb Troubleshooting community|compute|storage safety – AAA and RBAC
- 350-501 SPCOR
- 1.6b Describe administration aircraft safety – AAA and TACACS
- 300-540 SPCNI
- 4.1e Implement infrastructure safety – TACACS
OMG. That’s 10 totally different certifications from Affiliate to Skilled the place these matters present up. You’ll additionally discover them on Skilled-level exams, such because the Enterprise Infrastructure, Enterprise Wi-fi, Safety, Service Supplier, and Knowledge Heart labs. (If anybody on the market can discover one other matter with as broad a protection, please let me know within the feedback. I’d like to know what I’ve neglected to date.)
Go to the Cisco Studying Community to view the examination matters for all Cisco certification exams. View examination matters
Okay… it’s positively essential… however what is AAA?
AAA is a vital matter, however it’s one which even long-time community engineers could not absolutely perceive. So earlier than we see it in motion, how a couple of fast overview of what the “triple A’s” imply?
Within the “AAA in Motion!” comedian, Carl experiences all the AAA course of:
- The primary “A” stands for Authentication. We see this represented when Carl is prompted to confirm his identification earlier than he’s allowed to make a change to the community.
- The second “A” stands for Authorization. Even after the community verifies Carl’s identification, he has to verify whether or not he has the proper(s) to make this modification, based mostly on which rights he has been granted on the community.
- And the third and ultimate “A” stands for Accounting, which Carl sees in motion when the community logs the change he makes to the community.
TACACS comes into the image to help the centralized administration of customers, roles, and logs (authentication, authorization, and accounting). Whereas every community system may very well be regionally configured to deal with AAA, this doesn’t scale properly for enterprises. A greater answer is for every community system to speak with a central “server” for these actions. TACACS is a protocol that community units and servers use to speak and deal with every of the “A’s.” A “TACACS Server” is a software program utility that helps the TACACS protocol.
Can we get to the Exploration, already?!
Now that we perceive the important position that AAA performs in a community (and that it’s an important matter throughout many certifications), I’d like to indicate you methods to research and put together for it utilizing my favourite community simulation/virtualization instrument: Cisco Modeling Labs (CML). As a result of I’m all about sharing my exploration actions, I posted a few CML topology recordsdata on GitHub within the CML-community repository below Cisco DevNet.
You’ll see that one CML topology contains simply an IOL router, whereas one other provides a Nexus 9000v change to cowl information heart platforms as properly. So, after you’ve learn this weblog submit, positively obtain the topologies and discover them your self.
Tips on how to run a TACACS Server in Cisco Modeling Labs
Earlier than you possibly can configure TACACS on a change or router, you have to have a TACACS server out there within the community. A standard TACACS server for a manufacturing community is Cisco ISE, a full “identification providers engine” for system administration, community entry, wi-fi safety, VPN entry, and extra.
Cisco ISE is a vital product and matter for community engineers. In truth, now we have a certification examination devoted to it. And when you can add Cisco ISE to a CML node library utilizing the node definition out there on the CML-Neighborhood, operating a full ISE server within the topology can really feel overkill when the main target is simply on configuring TACACS for system administration.
Fortunately, there are light-weight options. My go-to choice is the open-source “tac_plus” utility that has been out there for a few years. Tac_plus is a primary Linux utility that may be downloaded and put in on most Linux distributions. Whereas energetic growth of the venture appears to have stalled, it really works nice and continues to be a wonderful choice for circumstances similar to this.
In the event you take a look at the picture of the CML topology, you’ll see “aaa-server” on the left-hand facet of the diagram. This can be a normal Ubuntu node from the CML reference platforms, with a beginning configuration setup to put in tac_plus and configure it as a primary TACACS server. Be at liberty to go and take a look at the configuration within the topology file for full particulars, however listed below are the fundamentals of what I did to construct my TACACS server:
- Set up the necessities to obtain and set up the tac_plus utility from supply code.
- Create the “tac_plus.conf” configuration file to specify the TACACS secret key, customers, and roles/privilege ranges for each IOS and NX-OS platforms.
- Create a “tac_plus.service” file to setup tac_plus as a service.
- Obtain, extract, set up, and begin the tac_plus server.
With the set up and configuration of the aaa-server a part of the bottom CML topology file, tac_plus can be operating and able to take requests as quickly because the lab is began.
cisco@aaa-server:~$ systemctl standing tac_plus
● tac_plus.service - tac_plus Service
Loaded: loaded (/and many others/systemd/system/tac_plus.service; enabled; vendor pres>
Lively: energetic (operating) since Mon 2024-10-14 19:16:37 UTC; 2s in the past
Most important PID: 5982 (tac_plus)
Duties: 1 (restrict: 2310)
Reminiscence: 416.0K
CPU: 2ms
CGroup: /system.slice/tac_plus.service
└─5982 /tacacs/sbin/tac_plus -G -C /and many others/tacacs/tac_plus.conf -d 8 >
Oct 14 19:16:37 aaa-server systemd[1]: Began tac_plus Service.
Oct 14 19:16:37 aaa-server tac_plus[5982]: Studying config
Oct 14 19:16:37 aaa-server tac_plus[5982]: Model F4.0.4.28 Initialized 1
Oct 14 19:16:37 aaa-server tac_plus[5982]: tac_plus server F4.0.4.28 beginning
Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 4 AF 2
Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 5 AF 10
Oct 14 19:16:37 aaa-server tac_plus[5982]: uid=0 euid=0 gid=0 egid=0 s=11063704>
Tips on how to allow AAA and TACACS on a Cisco IOS Router
With our TACACS server up and operational, we are able to now configure our IOS router to make use of it. Earlier than configuring the TACACS server on IOS, we have to guarantee some primary “pre-work” is finished on our router. IOS has been round for years and has skilled many modifications in how authentication and authorization are dealt with.
So, the very first thing we need to do is make sure the “new mannequin” of AAA is enabled on our system:
aaa new-model
Subsequent, we need to create an area person account that may entry and administer the system if the TACACS server turns into unreachable. You may additionally need to use an area account for serial/console connections.
username cisco privilege 15 secret cisco
On this command, the username and password are each set to “cisco.” (Not essentially the most safe selection, however that is only a lab.) The “privilege 15” a part of the command signifies that this person can be assigned an “administrator” position. Privilege 15 is the very best stage on an IOS system and permits the person to execute any and all instructions.
We’re able to configure and take a look at TACACS now. However first, I leap onto the console for the server and begin monitoring the logs. This fashion, I can verify and confirm outcomes on the server facet in addition to on the shopper.
# On aaa-server journalctl -fu tac_plus # Output Oct 14 19:16:37 aaa-server systemd[1]: Began tac_plus Service. Oct 14 19:16:37 aaa-server tac_plus[5982]: Studying config Oct 14 19:16:37 aaa-server tac_plus[5982]: Model F4.0.4.28 Initialized 1 Oct 14 19:16:37 aaa-server tac_plus[5982]: tac_plus server F4.0.4.28 beginning Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 4 AF 2 Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 5 AF 10 Oct 14 19:16:37 aaa-server tac_plus[5982]: uid=0 euid=0 gid=0 egid=0 s=1106370448
Within the above command, the “-f” argument “follows” the log messages as they arrive in. And the “-u tac_plus” choice limits the output to solely message from the tac_plus service.
Glorious. Now, again to the router to configure the tacacs server and add it to a gaggle of servers that the router can use for AAA service.
tacacs server aaa-server handle ipv4 192.168.0.10 key tacacs123 aaa group server tacacs+ AAA-TACACS server identify aaa-server
I’m all the time a fan of testing that one thing will (or possible will) work earlier than continuing. Conveniently, IOS helps a “take a look at aaa” command that we are able to use.
take a look at aaa group AAA-TACACS iosadmin admin123 legacy # Output Making an attempt authentication take a look at to server-group AAA-TACACS utilizing tacacs+ Person was efficiently authenticated.
That appears nice! And I can see the logs on “aaa-server” as properly.
Oct 14 19:55:16 aaa-server tac_plus[6473]: join from 192.168.0.1 [192.168.0.1] Oct 14 19:55:17 aaa-server tac_plus[6473]: login question for 'iosadmin' port unknown-port from 192.168.0.1 accepted
With a powerful sense of confidence, let’s full the AAA configuration for all three “A’s.”
! Authentication aaa authentication login default group AAA-TACACS native ! Authorization aaa authorization exec default group AAA-TACACS native aaa authorization console ! Accounting aaa accounting exec default start-stop group AAA-TACACS aaa accounting instructions 1 default start-stop group AAA-TACACS aaa accounting instructions 15 default start-stop group AAA-TACACS
Sustaining that robust sense of confidence, let’s see if it really works. Finish/exit on the router till you could log again in.
ios01 con0 is now out there Press RETURN to get began. Person Entry Verification Username:
Attempt to log into the router utilizing the TACACS credentials for the IOS system.
Person Entry Verification Username: iosadmin Password: ios01#
Success! Test the logs on the server, and you must see one thing like this:
Oct 14 20:05:03 aaa-server tac_plus[6492]: login question for 'iosadmin' port tty0 from 192.168.0.1 accepted Oct 14 20:05:03 aaa-server tac_plus[6493]: join from 192.168.0.1 [192.168.0.1] Oct 14 20:05:03 aaa-server tac_plus[6493]: Begin authorization request Oct 14 20:05:03 aaa-server tac_plus[6493]: do_author: person="iosadmin" Oct 14 20:05:03 aaa-server tac_plus[6493]: person 'iosadmin' discovered Oct 14 20:05:03 aaa-server tac_plus[6493]: exec authorization request for iosadmin Oct 14 20:05:03 aaa-server tac_plus[6493]: exec is explicitly permitted by line 6 Oct 14 20:05:03 aaa-server tac_plus[6493]: nas:service=shell (handed through) Oct 14 20:05:03 aaa-server tac_plus[6493]: nas:cmd* (handed through) Oct 14 20:05:03 aaa-server tac_plus[6493]: nas:absent, server:priv-lvl=15 -> add priv-lvl=15 (okay) Oct 14 20:05:03 aaa-server tac_plus[6493]: added 1 args Oct 14 20:05:03 aaa-server tac_plus[6493]: out_args[0] = service=shell enter copy discarded Oct 14 20:05:03 aaa-server tac_plus[6493]: out_args[1] = cmd* enter copy discarded Oct 14 20:05:03 aaa-server tac_plus[6493]: out_args[2] = priv-lvl=15 compacted to out_args[0] Oct 14 20:05:03 aaa-server tac_plus[6493]: 1 output args Oct 14 20:05:03 aaa-server tac_plus[6493]: authorization question for 'iosadmin' tty0 from 192.168.0.1 accepted Oct 14 20:05:03 aaa-server tac_plus[6494]: join from 192.168.0.1 [192.168.0.1]
I’ve coloured the server output to spotlight the authentication and authorization logs individually, exhibiting that they really are two totally different phases.
However what in regards to the ultimate “A” for accounting? Press Cntr-C to cease following the service log and open up the “accounting log.”
tail -f /var/log/tac_plus.acct # Output Oct 14 20:05:03 192.168.0.1 iosadmin tty0 async begin task_id=12 timezone=UTC service=shell
It’s best to see a message just like the above exhibiting the “begin” of the session on the router. Return to the router and run “write mem” to save lots of the configuration modifications to reminiscence. A brand new log message ought to present up within the accounting log:
Oct 14 20:10:11 192.168.0.1 iosadmin tty0 async cease task_id=13 timezone=UTC service=shell priv-lvl=15 cmd=write reminiscence
And now, exit the router to sign off. A brand new message ought to seem as properly:
Oct 14 20:11:02 192.168.0.1 iosadmin tty0 async cease task_id=13 timezone=UTC service=shell disc-cause=1 disc-cause-ext=9 pre-session-time=6 elapsed_time=89 stop_time=1728936662
And BAM. All three “A’s” have been validated. Glorious work!
Hopefully, this weblog has gotten you excited to finish your individual exploration of AAA and TACACS. And, you might be in luck—the CML topology recordsdata that I discussed above (and can once more beneath) are there so that you can seize and use immediately. Inside them are lab guides that stroll by means of another essential AAA matters, similar to utilizing native accounts on the console/serial line for IOS and configuring TACACS on Nexus units. Nevertheless, I encourage you to do some unbiased exploration and experiment with issues which can be not within the information:
What occurs should you sort the improper username/password? What occurs if the configured “tacacs key” is improper? What occurs if the TACACS server is unreachable?
Understanding the affect of issues and failures is important to a community engineer’s skill to be snug when one thing goes improper in “actual life.” It’s a lot better to interrupt issues within the lab than watch for manufacturing to have points. And there’s no higher instrument than Cisco Modeling Labs for that exploration.
My very own AAA exploration will proceed. On this weblog and lab, I solely scratched the floor of the subject and information wanted for various certifications. RADIUS servers can be utilized as a substitute of TACACS, and what about AAA for issues like VPN authentication, community entry with 802.1x, or different platforms like ASA firewalls?
There are such a lot of extra prospects for me to discover in later weblog posts. Would you prefer to see extra on AAA from me? Let me know within the feedback.
Till subsequent time!
Assets
Join Cisco U. | Be part of the Cisco Studying Community.
Comply with Cisco Studying & Certifications
X | Threads | Fb | LinkedIn | Instagram | YouTube
Use #CiscoU and #CiscoCert to affix the dialog.
Share:
